Drinking Fountain | Round Galvanized Pedestal | Freeze Resistant

Contemporary Push-Button Bubbler

Model 3380GFR is a freeze-resistant, barrier-free, pedestal drinking fountain with satin finish stainless steel bowl and steel pedestal with galvanized finish. Outfitted with the premier freeze resistant valve system technologies enabling year round all-weather operation.

Matching Products

Wall Mount
Satin Stainless Steel
Drinking Fountains

Wall Mount HiLo Satin Stainless Steel Drinking Fountains

Wall Mount
Stainless Steel HiLo
Drinking Fountains
with Back Panel

Equipped with vandal resistant components, this water fountain is not easily disrupted, quickly discouraging the worst of vandals. Heavy-Duty 11 gauge thick steel with galvanized finish provides an exceptional corrosion resistance in one of our toughest made fountains.

Haws manufactures all drinking fountains to be lead-free by all known definitions including ANSI/NSF Standard 61, Section 9, California Proposition 65 and the Federal Safe Drinking Water Act.

Specifications

18 gauge Type 304 Satin Stainless Steel Basin with Integral Swirl Design.
Polished Chrome-Plated Brass Push-Button, Bubbler Head, and Waste Strainer.
11 gauge Galvanized Substrate Steel Pedestal.
Meets Current Federal Regulations for the Disabled Including Those in the Americans with Disabilities Act.

Model 3380GFR | Freeze Resistant Round Galvin Pedestal Drinking Fountain

Legacy Model Number '3380GFR'

Now Requires the 3380GFR and one of Valve Systems (Model 6518FR & 6519FR) Listed Below (Sold Separately) for a Complete Unit.

Model 3380GFR - Round Pedestal (Freeze Resistant) Drinking Fountain with Round Sculpted Bowl.
Model 6518FR - Valve System (Freeze Resistant) fully engineered pneumatic operated valve.
Model 6519FR - Valve System (Freeze Resistant) specially designed Freeze-Guard™ valve for areas with a high water table, poor drainage, or surface flooding.

Freeze Resistant Valves

Model 6518FR is a fully engineered system with pneumatic operated freeze resistant bury valve installed below frost line, with check valve to drain water from unit when not in use and to prevent back-flow cross contamination.

Model 6519FR Freeze-Guard™ is patented freeze resistant push-button operated valve system. Fully enclosed system collects drained back supply water into water-tight reservoir located below the frost line. Collected water is then expelled into fountain waste system with the next operation of valve. Designed for areas with high water table, poor drainage or surface flooding.