Up Against a Deadline? Ask About QuickShip Options—Popular Products, Right Away!

Drinking Fountain | Wall Mount

Beautiful Satin Finish Resists Stains & Corrosion

Perfect for either public or private indoor/outdoor settings, Model 1001MS is a great fit in areas where aesthetics are important to the overall appeal of the architecture. This series is precisely mounted, making it a nice addition to any surrounding. Beautiful satin finish helps to maintain the fountains overall appeal so it always remains looking as new as it did when it was installed.

Matching Products

  • Model 1001MS Series is a Barrier-Free (Universal Access), Stainless Steel Drinking Fountain with Round Sculpted Bowl.
  • 18 gauge Type 304 Stainless Steel Satin Finish Basin with Integral Swirl Design.
  • 14 gauge Type 304 Stainless Steel Wall Bracket.
  • Push-Button Operated Stainless Steel Valve with Front-Accessible Cartridge and Flow Adjustment.
  • Polished Chrome-Plated Brass Vandal-Resistant Bubbler Head with Integral Laminar Anti-Squirt Flow.
  • Chrome-Plated Brass Vandal-Resistant Waste Strainer.
  • Vandal-Resistant Bottom Plate, and 1-1/4" O.D. Waste Pipe. (P-Trap and Stop Require Rear Access)

Model 1001 Series meets current Federal Regulations for the disabled including those in the Americans with Disabilities Act. Haws manufactures drinking fountains, electric water coolers and electric drinking fountains to be lead-free by all known definitions including ANSI/NSF Standard 61, Section 9, California Proposition 65 and the Federal Safe Drinking Water Act.

Model 1001MS | Wall Mounted ADA Drinking Fountain with Satin Stainless Steel Bowl on Square Arm and ADA Access Panels
Universal Access

Legacy Model Number '1001MS'
Now Requires the 2 Models Listed Below (Sold Separately) for a Complete Unit as Shown Above.
  • Model 1001MS - Stainless Steel Drinking Fountain with Round Sculpted Bowl.
  • Model MTGFR.DF1 - Steel In-Wall Mounting Frame.

  • Barrier-Free (Universal Access)
    Capabilities combined with its ease of use allows for a number of installation location possibilities.
  • Drain Clean-Out
    Top-down access to the drain allows the fountain to be cleaned without taking the unit apart.
  • Push Button
    Patented (Pat.# 6,981,692) stainless steel, push-button activated, valve assembly which allows for front access stream adjustment as well as cartridge and strainer access, this fountain offers 100% lead free waterways. The valve works at an operating pressure range of 30 to 90 psi.
  • Bubbler Head
    Polished chrome-plated brass bubbler head features an integral basin shank for added strength, and is equipped with a shielded, anti-squirt orifice.
  • Quality Control
    Fountain is pre-built and fully water and pressure tested to ensure no leaks and proper function for reduced installation time and added peace of mind.
Item Specific Details Available on Linked Model Numbers Below

Haws Drinking Fountain | Wall Mount (Mounting Frame Sold Separately)

1001MS Satin Stainless Bowl, Arm, Fountain, & Wall Panels (22 lbs) $2,594.00

Mounting Frame (Mounting Frame Required to Complete Legacy Model 1001MS)

MTGFR.DF1 Steel In-Wall Mounting Frame (10 lbs) $276.00


HCR8 8 GPH Remote Water Chiller (47 lbs) $1,004.00
6426 In-Line Lead Removal Filter (3 lbs) $89.00
(Prices F.O.B. Origin)
Bulk Inquiry
▼ Bulk Inquiry
Enter Item Quantities & 'Add to Cart'
From the 'Shop Cart' Screen -
Select 'Click for Quote' (Yellow Button)
Our expert Customer Service staff will work with you to provide the best pricing options available.